Helical Geared Motors
Home  Products Helical Geared Motors
We are instrumental in offering a wide range of Helical Geared Motors, which is designed using cutting-edge technology and from quality components. Our range of Helical Geared Motors conforms to DIN 42948. Moreover, these Helical Geared Motors are duly checked on various parameters in order to deliver a flawless range.
|
| Available In |
- Foot design
- Flange design
- Foot-cum-flange design
- Hub type design
|
| Components |
- Gear Case : The reduction gear trains are housed in a sturdy gear case of one-plece construction cast integral with its pedestal and internal partition wall which serves as both reinforce-ment and bearing housing. Gear case is manufactured from close grained cast iron and has ample surface area for heat dissipation
- Gear and Pinion : All gear components used are helical and manufactured from selected special alloy steel. Gears are generated on precise hobbing machines, heat treated and ground to achieve the best performance and efficiency
- Output Shafts : Output shafts of both geared motors and gear reducers and input shaft of inline gear reducers are manufactured from best quality medium carbon steel for high overhung load carrying capacities. For special applications, these shafts can also be heat treated
- Lubrication : The lubrication of gears and bearings is fool-proof, being achieved automatically by splash of oil, Thus, no special care is required except occasional topping up of the oil to required level, A large oil filler-cum-breather, oil level indicator and drain plug are provide on the gear box
- Electricals : Electric motor provided with geared motor is TEFC squirrel cage induction motor suitable for operation on 415V, 3-phase, 50 C/s AC supply as per IS : 325. All motors are provided in IP 55 enclosure and F/B class insulation. Geared motor fitted with electric motor of special design like flame-proof, crane duty, extended shaft on NDE, brake etc., can also be offered
- Manufacturing Standards : All output shafts are manufactured as per DIN 42948. Tolerance for shaft diameters may vary as per IS, k6 upto 50mm and m6 above 50mm. Keyways and keys are as per DIN 6885 with keyway tolerance P9. Key steel DIN 6880. Threading on output speed tolerance is ± 3%
- Testing : All Components ate throughly inspected at various stages ans assembled unit is tested on 'no load' for noise level, oil leakage output speed and temperature rise
|
| Features |
- Flame-proof
- Crane duty
- Extended shaft on NDE
- Longer working life
|
|
|
|
|
